Section 4 - Wireless Security
Configure WEP
Using the D-Link Wireless Connection Manager
It is recommended to enable WEP on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WEP key being used.
1.Open the Wireless Connection Manager by
2.Enter the WEP key exactly as it is on your wireless router or access point.
3.Click the Show text in the password field box to see the WEP key. Unchecking it will hide the key.
4.Click OK to connect to the network. Allow up to 30 seconds to connect.
If you would like to create a new network and enter the WEP settings, refer to the next page.
27 |