D-Link DWL-2210AP specifications Windows

Page 10

Using a Static IP Address to Connect to the DWL-2210AP

Windows 2000:

Go to Start > Settings > Network and Dial- up Connections. Double-click on the Local Area Connection associated with the Network Adapter installed on your system and select Properties.

Click Internet Protocol (TCP/IP)

Click Properties

Input a static IP address in the same range as the DWL-2210AP’s IP address of 192.168.0.50. Each computer/device must have a unique IP address.

Select Use the following IP address

IP address: 192.168.0.52

Subnet mask: 255.255.255.0

Click OK

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents DWL-2210AP Connecting the DWL-2210AP to Your Network Connecting Power Directly to the DWL-2210APConnecting PoE Power over Ethernet to the DWL-2210AP Connecting the DWL-2210AP to Your Network Front Panel Using the KickStart Wizard on a Network with a Dhcp Server Using the KickStart Wizard on a Network with a Dhcp Server Using the KickStart Wizard on a Network with a Dhcp Server Using a Static IP Address to Connect to the DWL-2210AP Windows XPWindows Windows Me & 98SE Configuration pull-down menu Mac OSOpen up your Web browser Click Advanced Click Ethernet Under Connection Type Technical Support
Top Page Image Contents