D-Link DWL-2210AP specifications Windows Me & 98SE

Page 11

Using a Static IP Address to Connect to the DWL-2210AP

Windows Me & 98SE:

Go to Start > Settings > Control Panel > Double-click on the Local Area Connection associated with the Network Adapter installed on your system > select Properties

Click Internet Protocol (TCP/IP)

Click Properties

Input a static IP address in the same range as the DWL-2210AP’s IP address of 192.168.0.50. Each computer/device must have a unique IP address.

Select Specify IP Address

IP address: 192.168.0.52

Subnet mask: 255.255.255.0

Click OK

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents DWL-2210AP Connecting Power Directly to the DWL-2210AP Connecting the DWL-2210AP to Your NetworkConnecting PoE Power over Ethernet to the DWL-2210AP Connecting the DWL-2210AP to Your Network Front Panel Using the KickStart Wizard on a Network with a Dhcp Server Using the KickStart Wizard on a Network with a Dhcp Server Using the KickStart Wizard on a Network with a Dhcp Server Windows XP Using a Static IP Address to Connect to the DWL-2210APWindows Windows Me & 98SE Mac OS Configuration pull-down menuOpen up your Web browser Click Advanced Click Ethernet Under Connection Type Technical Support
Top Page Image Contents