D-Link specifications Connecting PoE Power over Ethernet to the DWL-2210AP

Page 3

Connecting the DWL-2210AP to Your Network (continued)

Connecting PoE (Power over Ethernet) to the DWL-2210AP

•Step 1: Connect one end of an Ethernet cable (included with your package) to the LAN port on the DWL-2210AP and the other end of the Ethernet cable to the port labeled P+DATA OUT on the PoE base unit.

•Step 2: Connect another Ethernet cable from the DATA IN port on the PoE base unit to your router/switch or to a PC.

•Step 3: Attach the power adapter to the connector labeled POWER IN on the PoE base unit. Attach the power cord to the power adapter and into an electrical outlet.

Image 3

Contents DWL-2210AP Connecting Power Directly to the DWL-2210AP Connecting the DWL-2210AP to Your NetworkConnecting PoE Power over Ethernet to the DWL-2210AP Connecting the DWL-2210AP to Your Network Front Panel Using the KickStart Wizard on a Network with a Dhcp Server Using the KickStart Wizard on a Network with a Dhcp Server Using the KickStart Wizard on a Network with a Dhcp Server Windows XP Using a Static IP Address to Connect to the DWL-2210APWindows Windows Me & 98SE Mac OS Configuration pull-down menuOpen up your Web browser Click Advanced Click Ethernet Under Connection Type Technical Support