D-Link DSL-300G+ manual Using the Web Manager, Web-based Configuration Manager GUI

Page 30

DSL-300 ADSL Modem User’s Guide

4

Using the Web Manager

If you are setting up the Modem for the first time you may want to read the previous chapter, First Time Se Up. This chapter describes functions and features of the Modem’s configuration manager that are not described in the previous chapter.

Web-based Configuration Manager GUI

When you first access the web-based configuration manager, you will see a graphical user interface (GUI) that presents user-defined variables such as a User Name and Password if you using PPPoE or PPPoA for your ADSL service. This is also where you can change the Connection Type used by the Modem to establish the ADSL connection and ultimately the connection to the Internet. If you are going to up date or upgrade the Modem’s firmware, do this before making any other changes. To upgrade firmware, click the Update Firmware hyperlink to go to the Update menu.

The hyperlinks on the left side of the GUI are labeled according to their function. The Account Configuration menu is the first menu you will see when you access the configuration manager, regardless of what type of connection the Modem is configured to use. The menus linked to these hyperlinks are described in the remaining sections of this chapter.

Change

Connection

Type

Hyperlinks to

configuration

menus

Connect and Disconnect

Figure 8 Configuration Manager

Disconnect ADSL Connection

At any time you may terminate the ADSL connection by clicking on the Disconnect button at the bottom of the Account Configuration menu.

If the ADSL connection has been terminated click the Connect button to reconnect. If the connection can not be established after a few tries, there may be a problem with your ADSL service.

20

Image 30

Contents DSL-300G+ Adsl Modem User’s Guide Limited Warranty Wichtige SicherheitshinweiseHardware Link Offices for Registration and Warranty Service SoftwareTrademarks Copyright StatementContents Figures Requirements for Installation About This User’s GuideBefore You Start Connection Type Account Information User Name and PasswordEthernet Adapter NIC Bridged Ethernet Connections RFCAdditional Settings IPoA Connections RFCPage Modem Description and Operation Modem FeaturesIntroduction Adsl TechnologyLED Indicators Front PanelRear Panel Packing ListConnecting One Computer to the Modem Hardware InstallationPower On Modem Connecting a Local Ethernet Network to the ModemDSL-300 Adsl Modem User’s Guide First Time Set Up Configuring Your Computer for DhcpConfigure Windows XP for Dhcp DSL-300 Adsl Modem User’s Guide DSL-300 Adsl Modem User’s Guide Configure Windows 2000 for Dhcp WindowsConfigure Windows ME for Dhcp Windows MEWindows 95 Configure Windows 95, 98 for Dhcp Configure Windows NT 4.0 for DhcpWindows NT 4.0 workstations Access the Web-based Configuration Manager Account Configuration Menu First Time Set UpConfigure the Internet Connection PPPoE ConnectionsChanging the Connection Type Changing Connection TypePPPoA Account Configuration Initial Set Up Change Connection Type to PPPoADSL-300 Adsl Modem User’s Guide IPoA Account Configuration Initial Set Up Change Connection Type to IPoARFC 1483 Bridge Account Configuration Change Connection Type to RFC 1483 BridgeUsing the Web Manager Web-based Configuration Manager GUIDisconnect Adsl Connection System Setting VPI/VCI Settings AC Name PPPoE onlyPPP Account Configuration PPP InformationIPoA Account Configuration GatewaySummary Summary StatisticsBridge Connection Summary Screen Adsl Line Status Operation PathUpdate Firmware Update Firmware ScreenAccounts Management Accounts ManagementTechnical Specifications Data Transfer RateOffices Norway Link Norway Registration Card Print, type or use block letters