D-Link manual Using the Configuration Menu, Factory Default Settings for the DWL-6000AP

Page 13

Using the Configuration Menu

The Configuration Menu for the DWL-6000AP is web-based. The DWL- 6000AP can be set up using any current web browser, i.e., Internet Explorer 5.5 (or newer), or Netscape Navigator 4x (or newer).

The computer that you are using for initial configuration must have an IP Address within the same range as the IP Address of the DWL-6000AP. The DWL- 6000AP has a default IP Address of 192.168.0.50 with subnet mask 255.255.255.0

If you are not using a D-Link router in your network, you will need to assign a Static IP Address to the computer that you are using to configure the DWL- 6000AP, within the IP Address Range of the DWL-6000AP. For instance, you can assign a static IP address of 192.168.0.2 with subnet mask of 255.255.255.0 (Please see Networking Basics in this manual for information on Assigning a Static IP Address.)

Factory Default Settings for the DWL-6000AP

SSID for 802.11a

default

and 802.11b

 

Channel

36, 6

 

 

WEP

disabled

 

 

User Name

admin (lower case)

 

 

Password

(no password, leave field blank)

 

 

IP Address

192.168.0.50

 

 

13

Image 13
Contents Link AirProTM Contents Package Contents Introduction Connections Reset MDI RJ-45 Ethernet PortPage Leds Wireless BasicsWireless Basics Standards-Based Technology Installation Considerations IP Address Getting StartedGetting Started Factory Default Settings for the DWL-6000AP Using the Configuration MenuHome Wireless Using the Configuration MenuHome Wizard Using the Configuration Menu Home Wireless Using the Configuration Menu Advanced Performance Advanced Filters Wireless Access Settings Using the Configuration Menu Advanced Filters Wlan Partition Using the Configuration Menu Advanced Encryption Tools System Using the Configuration Menu Tools AdminTools Misc Using the Configuration Menu Tools FirmwareTftp Program Status Device Info Using the Configuration Menu Run Tftp ProgramHelp Using the Configuration Menu Status StatsNetworking Basics Using the Network Setup Wizard in Windows XPNetworking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Network Setup Wizard Right-click on My Computer Naming your ComputerComputer name Checking the IP Address in Windows XPAssigning a Static IP Address in Windows XP/2000 Network Connections Assigning a Static IP Address Windows XP/2000 Select Built-in Ethernet Assigning a Static IP Address with Macintosh OSXSelecting a Dynamic IP Address with Macintosh OSX Checking the Wireless Connection by Pinging in Windows XP Checking the Wireless Connection by Pinging in Windows MeOther Networking Tasks Adding and Sharing Printers in Windows XPStart Printers Faxes Click on Add a printer Select Local printer attached to this computer Adding a local printerAdding a local printer Adding a local printer Go to Start Printers and Faxes Sharing a network printerNetworking Basics Sharing a network printer Select Browse for a printer Go to Start Printers and Faxes Sharing an LPR printer Address and the Port Networking Basics Sharing an LPR printer Click Have Disk This screen will display informa- tion about your printer Troubleshooting Default My Computer Troubleshooting Why can’t I get a wireless connection? Why does my wireless connection keep dropping?Resetting the DWL-6000AP to Factory Default Settings Temperature Technical Specifications802.11a Specifications 802.11b Specifications Technical Support for customers within the United States Contacting Technical SupportWarranty and Registration Page Important Note