D-Link DAP-1160 manual Wireless Settings, Mode

Section 3 - Configuration

Wireless Settings

Mode:

Wireless Network

Name(Also called

the SSID):

Site Survey:

Wireless

Channel:

Enable Auto Channel Scan:

Enable Hidden Wireless:

Wireless Security Mode:

Select Access Point mode,AP Client mode,Bridge mode,Bridge with AP mode or Repeater mode.

dlink is the default setting. The SSID is a unique name that identifies a network. All devices on a network must share the same SSID name in order to communicate on the network. If you choose to change the SSID from the default setting, input your new SSID name in this field.

Click this button to choose the root AP from an available connection list. This button is available in AP client and Repeater mode.

Auto channel selection is the select by default. Input a new number if you want to change the default setting. All devices on the network must be set to the same channel to communicate on the network.

Select Enable or Disable. Enable this feature to auto-select the channel for best wireless performance.

Select Enable if you do not want the SSID to be broadcast by the DAP-1160. This prevents the SSID from being seen by Site Survey utilities, so any wireless clients will have to be pre-configured with the SSID of the DAP-1160 in order to connect to it.

Select a wireless security setting. Options are None, WEP, WPA, WPA2 or WPA2-Auto.See p.34 for a detailed explanation of the wireless security options.

D-Link DAP-1160 User Manual 17