D-Link DAP-1160 manual Bridge Settings, WDS Security None WEP64/128

Section 3 - Configuration

Bridge Settings

In Bridge mode, The DAP-1160 wirelessly connects multiple networks, without functioning as a wireless AP.

Wireless Network Name (also called the SSID):

Site Survey:

Wireless Channel:

Enable Auto Channel scan:

Enable Hidden Wireless:

Remote AP MAC:

WDS Security:

None:

WEP64/128:

WPA-PSK/WPA2- PSK:

The Wireless Network Name is a unique name that identifies a network. All devices on a network must share the same wireless network name in order to communicate on the network. If you choose to change the wireless network name from the default setting, input your new wireless network name in this field.

This option is unavailable in Bridge mode.

All devices on the network must share the same channel.

This option is unavailable in Bridge mode.

This option is unavailable in Bridge mode.

Enter the MAC addresses of the APs in your network that will serve as bridges to wirelessly connect multiple networks.

Select None Encryption to across the network.

Select WEP 64bits/128bits to limit communication to only those devices that share the same WEP settings.

Select WPA-PSK, WPA2-PSK to secure your network using a password and dynamic key changes (No RADIUS server required).

Note: Bridge Mode is not completely specified in WiFi or IEEE standards. It can works with other DAP-1160..Communication with other access points is not guaranteed.

D-Link DAP-1160 User Manual 21