Software Installation
Microsoft Windows NT 4.0 (with Service Pack 3 and NDIS Hot Fix), or later is needed before network drivers are installed.
Note: Please make sure you have installed SNMP service
before you installed Service Pack 3 and NDIS Hot Fix .
Driver Installation
After properly installing the adapter into the server, the next step is to install the driver software.
1)Start the server with Windows NT 4.0 and insert the software diskette into drive A.
2)Open the icons, My Computer → Control Panel → Networks.
3)Select Add Adapter → Have Disk. Choose “
4)After driver files are copied to the server, a configuration window will appear. From here, you can assign the Connection Type and Network Address for adapter. It is suggested that you choose the default values for both of these.
5)Restart the computer.
Failover Installation
Please reference the “SetupGuide.pdf “.
9