D-Link DFE-570TX manual Connect the Network Cable

Page 13

3.Install the bracket screw which secures the card to the computer chassis.

4.Replace the computer’s chassis cover.

5.Reconnect the computer’s power cord, and switch computer power on. If the BIOS section of your computer’s boot program is Plug and Play compliant, then at power-up the BIOS will automatically configure any newly installed Server Card adapter.

NOTE: Due to a fault in some Plug-n-Play BIOS programs, it happens occasionally that a newly installed adapter is assigned an Interrupt Number which is already assigned to another device. In such a case, the conflict of Interrupt Number will cause faults in the behavior of both devices. Then it is necessary to run the CMOS Setup utility, and manually assign a non-conflicting Interrupt Number.

Connect the Network Cable

Category 5 UTP cable qualifies for both, the Fast Ethernet and Ethernet, cabling rules. The maximum length of any single cable run between any station and its supporting hub is 100 meters. The maximum length of a cable joining two switches is 10m in general, but is 100m when both switches qualify as Ethernet Class 2 Repeaters (all D-Link Ethernet switches do qualify). However, these cable runs may need to be shorter than the given individual maximum lengths, because their lengths are globally restricted by the rule that the maximum aggregated cable run between any two stations is 205m. Up to 4 cables can be used in any combination per Server Card.

7

Page 12 Page 14
Image 13
Page 12 Page 14
Contents User’s Guide Copyright Statement Limited WarrantyFCC Certifications Software HardwareLimitation of Warranties Link Offices for Registration and Warranty ServiceLimitation of Liability Page Table of Contents About Fast Ethernet IntroductionAbout Auto-negotiation Server Card Features About Fault ToleranceAbout Adaptive Load Balancing Page Hardware Requirements InstallationOperating System Requirements Unpack and Inspect Install the AdapterConnect the Network Cable Connecting for 10Mbps Ethernet Connecting for Fast Ethernet 100MbpsUsing a Crossover Cable Driver Installation Software InstallationStatus and Alerts Status and StatisticsPage Troubleshooting Page Specifications Offices Print, type or use block letters Registration Server Card

DFE-570TX specifications

The D-Link DFE-570TX is a high-quality network interface card (NIC) designed to provide reliable and efficient connectivity in a variety of computing environments. This PCI card is particularly well-suited for both small office setups and larger corporate networks, thanks to its robust specifications and features.

One of the key attractions of the DFE-570TX is its support for Fast Ethernet technology, allowing for data transfer rates of up to 100 Mbps. This makes it an ideal solution for applications that need quick connections, such as video streaming and large file transfers. The card also supports auto-negotiation, meaning it can automatically adjust its settings to match the speed and duplex capabilities of the network switch or hub it is connected to. This feature ensures optimal performance and minimizes configuration issues.

The DFE-570TX utilizes a PCI plug-and-play design, which simplifies installation. Users can easily install the card in an available PCI slot, and the operating system will automatically recognize it, streamlining setup for those who may not be technically inclined. This ease of use makes it an ideal choice for both novice users and seasoned IT professionals.

In terms of compatibility, the DFE-570TX supports a range of operating systems, including various versions of Windows and Linux, ensuring it can be integrated into an existing network with minimal hassle. This versatility allows businesses to maintain their existing infrastructure while upgrading their networking capabilities.

Another important characteristic of the DFE-570TX is its built-in 802.3u compliance. This adherence to industry standards guarantees that the NIC can communicate effectively with a wide array of devices on the network, allowing for seamless integration and data exchange. The card also features extensive diagnostics, including onboard LEDs that indicate link status and activity, enabling quick troubleshooting when necessary.

Energy efficiency is another significant factor, with the DFE-570TX designed to minimize power consumption while still delivering high performance. This feature not only helps in reducing operational costs but also aligns with growing trends toward environmentally friendly technology solutions.

In summary, the D-Link DFE-570TX is an excellent choice for those looking to enhance their network capabilities. With its Fast Ethernet support, easy installation, broad compatibility, and energy-efficient design, this NIC stands as a reliable option for businesses focused on improving their networking performance while maintaining cost-effectiveness.
Top Page Image Contents