VT1000v Series Voice Terminal User Guide
Basic Configuration
To perform basic configuration:
1On a computer connected to the voice terminal PC port or a router, start a Web browser such as Microsoft® Internet Explorer or Netscape Navigator®.
2In the Address or Location field, type http://192.168.102.1 and press ENTER to display the Status page, which displays the Motorola voice terminal settings.
3Click Basic Configuration to display the Basic Configuration window. Its fields are:
Obtain IP This setting is enabled by default. If either of the following is true, no
Address configuration on this page is required:
Dynamically ■ If you have a cable modem with no router and your cable provider assigns IP addresses dynamically, the Motorola voice terminal obtains its IP address dynamically from your cable provider.
■If you have a router with DHCP enabled, the Motorola voice terminal obtains its IP address dynamically from your router.
Specify Static If your broadband provider requires a static IP address, enable
IP Address Specify Static IP Address. Type the Static IP Address and IP addresses for the Subnet Mask, Default Gateway they provide.
Enable PPPoE If you have a DSL modem and no router, enable PPPoE and type the Service Name, User Name, and Password provided by your
DSL provider.
19