Motorola SBV5121 manual Before You Begin, Rear Panel, Reset, +12VDC

Introduction

Installation Troubleshooting Glossary License

Rear Panel

TEL 1 TEL 2

ETHERNET USB

1& 2

3 4

CABLE

+12VDC

5 6

7

The rear panel provides cabling connectors and the power receptacle:

Key Item	Description
1 & 2 Tel 1 and Tel 2	Provide connections for two telephone lines.

3ETHERNET Provides a connection to Ethernet equipped computers using a cable terminated with an RJ-45 connector.

4	USB	Provides a connection to USB equipped computers.
5	Reset	If you experience a problem, you can push this recessed button to reset the VoIP cable modem
		(see “Troubleshooting” on page 35). Resetting may take some time (5 to 30 minutes) because
		the VoIP cable modem must find and lock on the appropriate communications channels.
6	CABLE	Provides a connection to the coaxial cable (coax) outlet.
7	+12VDC	Provides power to the VoIP cable modem.

Before You Begin

Before you begin the installation, check that you received the following items with your VoIP cable modem:

Item

Power adapter or cable

10/100Base-T Ethernet cable

USB cable

Phone wire

SBV5121 VoIP Cable

Modem CD-ROM

Description

Connects to:

•the AC power outlet

•to a UPS

Connects to the Ethernet port

Connects to the USB port

Connects the telephone to the cable system to provide telephone service

Contains the User Guide and USB drivers

SBV5121 VoIP Cable Modem User Guide 4