Addtron Technology WebNet manual How To Get Started

Page 38

AHow To Get Started

Your new WebNet must be assigned a valid IP address before you can use it. This document describes how to do it, using the ARP command. (For more information consult section 1 in the WebNet System Manual). Assume your PC is assigned an IP address on the 192.168.26.x subnet, and your WebNets MAC address is 00:D0:C8:00:1A:BC (printed on a white sticker on the WebNet module). To assign IP address 192.168.26.7 to the WebNet do the following:

1.Connect the WebNet to your Ethernet and apply power.

2.Type arp -s 192.168.26.7 00-D0-C8-00-1A-BC in a command prompt on your PC (See section 1.2.2 in the WebNet System Manual).

3.Type ping 192.168.26.7 , and when the WebNet responds to the ping command, it has been assigned the IP address.

4.Type arp -d 192.168.26.7 to remove the static entry from the PCs arp table. The WebNet is assigned a valid IP address and ready for use

5.Use a standard web browser to open the network page: http://192.168.26.7. To explore all the included features use “admin” as user and “admin” as password when you access secure files.

Note: If your browser does not find your WebNet , make sure its configured to use your LAN, not a Modem. If you connect through a proxy server - e.g. win-proxy - you must disable use of proxy in your browser settings.

To get hardware and software documentation for the WebNet module and WebPIC or WebRJS i/f boards, please visit our website at http://webnet.iocon.dk/Service.

38

WebNet User’s Guide

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Consulting A/S AprilWebNet User’s Guide Contents WebNet User’s Guide Your ARP table AutoIP Feature References List of Figures Introduction WebRJS module with the WebNet module insertedPage Unpacking Component side of the WebRJS-DCE board WebNet module is being inserted into the WebRJS module Installation WebNet User’s Guide WebNet User’s Guide WebNet home Configuration Dirname WebNet User’s Guide WebNet User’s Guide Configuration page for network settings WebNet User’s Guide Setup page for the Device Sharing service WebNet User’s Guide Monitoring and Statistics Socket Status WebNet User’s Guide WebNet User’s Guide Tools WebNet User’s Guide WebNet User’s Guide Uploading and Running Scripts WebNet User’s Guide WebNet User’s Guide WebNet as an RS232 Gateway WebNet User’s Guide WebNet User’s Guide Example of a WebNet architecture How To Get Started WebNet IP configuration WebNet User’s Guide References References
Top Page Image Contents