Addtron Technology WebNet manual Unpacking

Page 9

2Unpacking

2.1Package Contents

The WebNet Start kit consists of the following items:

How To Get Started sheet (See also apendix A).

The WebNet DIMM module.

The WebRJS adapter board.

An AC adapter (240V/50Hz).

An ethernet UTP Cat. 5 interface cable (2 m).

An RS-232 DB9BU interface cable (1,8 m)

WebNet User’s Guide.

2.2The WebNet DIMM Module

The front side of the WebNet module is the one with the IC with the white label on it. On Figure 2, the numbers indicate:

Figure 2: The WebNet DIMM module

1.The ethernet status LED’s

2.Battery clip for real-time clock backup battery (from WebNet rev. 4)

WebNet User’s Guide

9

Image 9
Contents April Consulting A/SWebNet User’s Guide Contents WebNet User’s Guide Your ARP table AutoIP Feature References List of Figures WebRJS module with the WebNet module inserted IntroductionPage Unpacking Component side of the WebRJS-DCE board WebNet module is being inserted into the WebRJS module Installation WebNet User’s Guide WebNet User’s Guide WebNet home Configuration Dirname WebNet User’s Guide WebNet User’s Guide Configuration page for network settings WebNet User’s Guide Setup page for the Device Sharing service WebNet User’s Guide Monitoring and Statistics Socket Status WebNet User’s Guide WebNet User’s Guide Tools WebNet User’s Guide WebNet User’s Guide Uploading and Running Scripts WebNet User’s Guide WebNet User’s Guide WebNet as an RS232 Gateway WebNet User’s Guide WebNet User’s Guide Example of a WebNet architecture How To Get Started WebNet IP configuration WebNet User’s Guide References References