10ETHERLINK SERVER 10/100 PCI NIC QUICK START GUIDE
To install the NIC driver and software in a PC or server running Windows 95:
1Make sure that the NIC is installed in the PC and connected to the network.
2Turn the PC power on.
Windows detects the NIC. Depending on the version of Windows 95 that is installed on your PC, either the New Hardware Found or the Update Device Driver Wizard screen appears.
■ If the New Hardware Found screen appears:
aSelect Driver from disk provided by hardware manufacturer, and then click OK.
The Install From Disk dialog box appears.
bInsert EtherDisk 1 in drive A, make sure that A:\ appears in the entry box, and then click OK.
Files are copied.
■If this is the first time that networking is being installed on your PC, a message is displayed indicating that you must provide computer and workgroup names that will identify this computer on the network. Click OK to display the Network Identification tab, and go to step 3.
■If networking has already been installed on your PC, you are prompted for the Windows 95 media. Go to step 4.
■If the Update Device Driver Wizard starts:
aInsert EtherDisk 1 in drive A, and then click Next.
Windows finds the driver and asks if you want to use this driver.
bClick Finish.
You are prompted for EtherDisk 1.
cClick OK.
dMake sure that A:\ appears in the entry box, and then click OK.
Files are copied.