8ETHERLINK SERVER 10/100 PCI NIC QUICK START GUIDE
7Click Finish.
The System Settings Change screen appears, prompting you to restart the computer.
8Remove any remaining diskette from drive A, and then click Yes to restart the computer.
You must restart your computer to complete the installation.
The driver installation is complete. Go to “Verifying Successful Installation” on page 13 to confirm that the NIC is properly installed.
Windows 98
To install the NIC driver and software under Windows 98, you need the Windows 98 installation files. These files may be on a CD or diskettes, or they may have been copied to your hard drive when Windows 98 was installed on
your system.
If you encounter problems during the installation, see the TROUBLE.TXT file located in the HELP directory on EtherDisk 2 for troubleshooting tips.
To install the NIC driver and software in a PC or server running Windows 98:
1Make sure that the NIC is installed in your PC and connected to the network.
2Turn the PC power on.
Windows detects the NIC. The Add New Hardware Wizard starts.
3Insert EtherDisk 1 in drive A, and then click Next.
4Select the Search for the best driver for your device (Recommended) option, and then click Next.
5Select Floppy disk drives, clear any other checked options, and then click Next.
Windows finds the driver file for the device.
6Click Next. Files are copied.