Installing Network Drivers | 9 |
The Insert Disk screen appears, requesting that you insert the Windows 98 disk.
7Remove EtherDisk 1, insert the Windows 98 installation diskette in drive A, and click OK.
Alternatively, if the Windows 98 installation files reside on your hard drive, click OK, enter the path to the directory containing these files in the Copy files from entry box, and then click OK.
Files are copied. The installation is complete when the Add New Hardware wizard prompts you to click Finish.
8Click Finish.
The System Settings Change screen appears, prompting you to restart the computer.
9Remove any remaining diskette from drive A, and then click Yes to restart the computer.
You must restart your computer to complete the installation.
The installation is complete. Go to “Verifying Successful Installation” on page 13 to confirm that the NIC is properly installed.
After Windows restarts,
Windows 95
To install the NIC driver and software under Windows 95, you need the Windows 95 installation files. These files may be on a CD or diskettes, or they may have been copied to your hard drive when Windows 95 was installed on
your system.
If you encounter problems during the installation, see the W95NDIS.TXT file located in the Help directory on EtherDisk 2 for troubleshooting tips.