ADTRAN T200 FNID specifications L1-5C Issue 3, September Clei Code NCDIFBH4, Revision History

Section 61245201L1-5C

Issue 3, September 1999

CLEI Code: NCDIFBH4 _ _

FNID and T200 FNID

Fractional T1 Network Interface Device

Installation and Maintenance

CONTENTS
1.	GENERAL		1
2.	INSTALLATION		2
3.	CONNECTIONS		3
4.	DSL SYSTEM TESTING		4
5.	CONTROL PORT OPERATION		4
6.	DSL DEPLOYMENT GUIDELINES		11
7.	TROUBLESHOOTING PROCEDURES		12
8.	MAINTENANCE		12
9.	PRODUCT SPECIFICATIONS		12
10. WARRANTY AND CUSTOMER SERVICE			12
Appendix A. FT1 Loopbacks			A-1
FIGURES
Figure 1.		ADTRAN FNID	1
Figure 2. FNID Option Switch Locations			2
Figure 3. FNID Network Loop Connection Locations			4
Figure 4. RS-232 (DB9) Pin Assignments			4
Figure 5. Introductory Menu Screen			7
Figure 6. HDSL Main Menu Screen			7
Figure 7. Current System Status Screen			8
Figure 8. Performance History Screen			8
Figure 9. Loopback Options Screen			9
Figure 10. Self Test Options Screen			9
Figure 11. Provisioning Options Screen			10
Figure 12.		Troubleshooting Screen	10
Figure 13. DSL Deployment Guidelines			11
Figure A-1.		FT1 Loopbacks	A-1
Figure A-2. FT1 DP Network Loopback			A-1
Figure A-3. FT1 DP CPE Loopback			A-1
Figure A-4. FT1 Repeater #1 or # 2 Network Loopback			A-2
Figure A-5. FNID Network Loopback			A-2
Figure A-6. FNID CPE Loopback			A-2
TABLES
Table A. Front Panel Functions			3
Table B.		FNID Card Edge Pin Definitions	3
Table C.		Definition of Screen Abbreviations	5
Table D. Loop Insertion Loss Data			11
Table E.		Troubleshooting Guide	12
Table F.		FNID Unit Specifications	13
Table A-1.		FT1 Loopback Select Codes	A-3

	FNID
1245201L1
		DSL
		DS1
ESF		SF
(YEL)
		(GRN)
B8ZS
		AMI
(YEL)
		(GRN)
		LBK
L		LOC
B
K
		REM
M	TX
O
N	RX
R
S
2
3
2

Figure 1. ADTRAN FNID

1. General

This practice is an installation and maintenance (I/M) guide for the ADTRAN Fractional T1 Network Interface Device (FNID). Figure 1 is an illustration of the ADTRAN FNID.

Revision History

This practice has been reissued to reflect additional support detail for two FT1 repeater applications.

The ADTRAN FNID is a network terminating unit used to deploy a fractional T1 circuit using 2-wire metallic facilities on CSA loops. This practice is written to support both the T200 FNID circuit pack (P/NÊ1245201L1) and the FNID standalone

(P/NÊ4245201L1) units.

The FNID is housed in a standalone metal enclosure. The T200 FNID card plugs into a standard Type 200/400 multiple mounting shelf.

61245201L1-5C	Trademarks: Any brand names and product names included in this document are	1
	trademarks, registered trademarks, or trade names of their respective holders.