ADTRAN NetVanta Series manual Quick Configuration Guide, Equipment Required, Network Diagram

Page 1

NetVanta Series

(with Octal T1 Wide Module)

Quick Configuration Guide

61200890L1-42B

November 2004

Equipment Required

•A VT100 terminal or a PC with VT100 emulator software for connecting to the unit.

•DB-9 (male) to DB-9 (female) straight-through serial cable for configuring the unit.

•Appropriate cable(s) for connecting the system to the existing network.

The configuration sections of this quick configuration guide are formatted to provide step-by-step text descriptions for selected applications. The configuration parameters used in the example outlined in this document are for instructional purposes only. Please replace all bold underlined entries (example) with your specific parameters to configure your application.

Network Diagram

Multilink PPP Internet Access

Technical Support 1-888-4ADTRAN (1-888-423-8726)

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Network Diagram Quick Configuration GuideEquipment Required Connect to the NetVanta Configure the Ethernet InterfaceSet the Enable Security Mode Password Configure a Telnet SessionConfigure the Frame Relay Virtual Interface Create the Interface and Define the Encapsulation Configure the PPP InterfaceCreate the PVC and Assign an IP Address Create a T1 to a Virtual Interface Cross-Connect Configure the Multilink PPP interfaceCreate an Octal T1 Multilink Cross-Connect Save the Configuration
Top Page Image Contents