AutoLink for Windows 3.x, Windows for Workgroups, and DOS
This section describes how to install the network driver for a notebook running Windows 3.x, Windows for Workgroups, and DOS using the 3Com AutoLink™ program. The AutoLink program automatically installs the NetWare ODI client software (including the driver), and modifies the CONFIG.SYS and AUTOEXEC.BAT files.
To use the AutoLink program, the notebook must use the Novell NetWare 3.12, 4.10, or 4.11 network operating system, and be a NetWare DOS ODI client.
1Make sure the CardBus PC Card is installed and connected to the network, as described in Chapter 1.
2Boot the notebook under DOS.
3Insert the LAN Installation Disk in the floppy drive, and type the following at the DOS prompt:
a:\install [Enter]
4Choose Auto Install and Config for NetWare (AutoLink). An OS selection screen appears.
5Select AutoLink for DOS, Windows 3.x, or WFW 3.11.
Several messages appear while the AutoLink program is running. A final message indicates successful installation.
6When prompted, remove the LAN Installation Disk and reboot the notebook.
7When prompted, type your user name and password to complete installation.