3Com DIGITAL MODEM manual Isdn

B-8 APPENDIX B: AT COMMANDS, REGISTERS, AND RESULT CODES

Table B-3 Remote S Registers (continued)

Registers	Descriptions
S58	Terminal Initialization State:
	Indicates the status of the second TEI using SPID 2. This
	information is provided only if your carrier requires a second
	directory number. This field is read-only.
	0	— 3Com Impact digital modem has not attempted
	initialization
	1 — 3Com Impact digital modem has initialized successfully
	using SPID 2
	2	— 3Com Impact digital modem has failed initialization
	using SPID 2
S59	U Interface Status:
	This field is read-only.
	0	— U interface is not synchronized with the switch
	1	— U interface is synchronized and ready
S60	B Channel Data Rate:
	56 — 56 Kbps (default)
	64 — 64 Kbps
S61	Outgoing Call Type:
	0	— Follow dial modifiers (default)
	2	— ISDN
	3	— Internal analog fax modem
S63 (only for models with	Incoming Voice Call Routing (bit map)
an internal fax modem)	Bit Position/Feature:
	0	— Phone #1 internal analog fax modem
	1	— Phone #1 Phone Out port
	2	— Phone #2 internal analog fax modem
	3	— Phone #2 Phone Out port
S65	Voice Automatic Number Identification:
	Displays the phone number of an incoming voice call. This
	field is read-only.
S66	Data Automatic Number Identification:
	Displays the phone number of an incoming data call. This
	field is read-only.

(continued)