3Com PC Card manual Updating LAN Drivers, Updating Modem Drivers

Page 17

Updating Windows 95 Drivers 13

Updating Windows 95 Use the following procedure to update the drivers on your system.

Drivers

Updating LAN Drivers

1From the Control Panel, open the System application.

2Select the Device Manager tab.

3Double-clickNetwork Adapters.

4Double-click3Com 10-100 LAN + 56K Modem CardBus PC Card (Ethernet interface).

5Open the Driver tab and click Update Driver.

6Choose Select Driver from list and click Next.

7Select Have Disk. Specify the location of the new driver ﬁles and click OK.

8After Windows copies the ﬁles, click Restart for the changes to take effect.

Updating Modem

Drivers

1From the Control Panel, open the System application.

2Select the Device Manager tab.

3Double-click Modems.

4Double-click3Com 10-100 LAN + 56K Modem CardBus PC Card (Ethernet interface).

5Open the Driver tab and click Update Driver.

6Choose NO: Select Driver from list and click Next.

7Select Have Disk. Specify the location of the new driver ﬁles and click OK.

8After Windows copies the ﬁles, click Restart for the changes to take effect.

Image 17

Contents 3Com 10/100 LAN+56K Bayfront Plaza 3Com CorporationSanta Clara, California 95052-8145Contents Diagnostics Ports IdentifyingLAN+Modem Card Inserting the LAN+Modem Card InsertingCable appropriate for a network connection at your site Connecting to aNetwork Description Steady Off LEDTelephone Line Connecting the Modem Adapter to the Telephone LineCables DisconnectingWindows Interface Installing the NetworkType of Network Component Manufacturer Option to Select Adding Network Software ComponentsConﬁrming Installation Installing the ModemTesting the Modem InstallationSymptom Solution TroubleshootingUpdating Modem Drivers DriversUpdating LAN Drivers Page Windows Adding Network Software Components CD-ROM Testing the Modem Uninstalling the Card Windows 95/98 Installation disk Windows NT Windows NT Menu Page Setup for Software SettingsHints for Good ConnectionsUsing the Modem Redialing Dialing Stored Numbers Additional Modem FeaturesEntering AT Commands AT CommandsAnswer Mode Dial NumberInterrogate Modem Status Echo CommandsHook Switch Control Handshaking Verbose modeReturn to On-Line State Return Result CodesRecall User Conﬁguration Connection Result CodesResult Code Set/Call Progress Registers S10 Common RegistersS11 S12S16 S14S18 S19Bit value DTE Speed S20Using the Modem S23 = 1. Storable Registers Using the Modem S35 S33S34 = Disconnect S41 S38S39 Discard all buffered data immediately S49 S52 Analog Modem RegistersRegisters Using the Modem Registers S73 S71S72 First 8 bits. Nonstorable. Default is COM Port Conflict Modem TroubleshootingModem Troubleshooting Page LAN Diagnostics DiagnosticsPage Bulletin Board System Internet Site FTP SitePage Warranty and Regulatory Information FCC Declaration Canadian Notice