3Com PC Card manual S33, S34, S35

S Registers 41

S31 Bit-mapped. Storable.

Bits 1-0. V.25bis selection (%V CMD)

■0 = Asynchronous V.25 (%V1)

■2 = HDLC V.25bis NRZ (%V3)

■1 = Bisync V.25bis NRZ(%V2)

■3 = HDLC V.25bis NRZI (%V4)

Bit 2. Synchronous mode V.13 operation (&C CMD)

■0 = Enabled

■1 = Disabled

Bit 3. Ignore keyboard abort on answer (%Q CMD)

■0 = Enabled

■1 = Disabled

Bit 4. DTE Autobauding (%B CMD)

■0 = Enabled

■1 = Disabled

Bits 5. Reserved

Bit 7,6. Command set selection (%V))

■00 = AT command set (%VO)

■10 = V.25bis enabled as per bits 1,0 (for other than%V1 -%V4))

■01 = V.25ter (%V5)

■11 = Not defined

S32 Bit-mapped. Storable.

Bits 1-0. Encryption mode select (#S CMD)

■00 No encryption (#S0)

■10 Reserved for later use

■01 Force V.42bis encryption(#S1)

■11 Reserved for later use

Bits 3-2. MNP Extended Services (-K CMD)

■00 Disabled (-K0)

■10 Enabled without MNP indication during the answer detect phase. (-K2)

■01 Enabled (-K1)

Bit 4. Power level adjustment setting (M command)

■0 Disable M0

■1 Enabled M

Bits 6-5. Force an initial connection speed (*H CMD)

■00 Highest supported (*H0)

■01 1200 bps (*H1)

■10 4800 bps (*H2)

	Bit 7. MNP10 Select ()N CMD)
	■	0	= Enabled
	■	1	= Disabled
S33	Cellular Transmit Level. Value: 0 - 35. Default = 26. Storable.
S34	Answer Log-on Sequence. If set to 255, no log on in answer. Value: 0 - 9. Default =
	0. Storable.

S35

Transmit Level (dBm). Value: 0 - 20. Default = 9. Storable.