4CHAPTER 1: INSTALLING AND CONNECTING THE CARD
LAN Connector LEDs The LEDs on the network connector display the status of your network link.
Figure 4 LEDS
Table 1 LAN Connector LEDs
LED | Description | Steady | Off |
|
|
|
|
10 LNK | Link integrity | Good | No connection between card |
|
| connection between PC | and hub. (Off when 100 LNK |
|
| Card and hub | LED is on.) |
|
|
|
|
100 LNK | Link integrity | Good | No connection between card |
|
| connection between PC | and hub. (Off when 10 LNK |
|
| Card and hub | LED is on.) |
|
|
|
|
You can use the LEDs to verify link integrity, but the LAN+Modem card must be connected to the network and the network drivers must be installed. For information on installing drivers, see:
■“Windows 95” on page 7
■“Windows 98” on page 15
■“Windows NT” on page 21