10CHAPTER 2: INSTALLING THE NETWORK DRIVER
Windows 95
This section includes different installation procedures for Windows 95 version A and Windows 95 version B (also called OSR 2). To find out which version you are running:
1In the Windows Control Panel,
2Click the General Tab to display the Windows 95 version information.
If your Windows 95 version is 4.00.950B (OSR 2), you are using Windows 95 OSR 2.
If your Windows 95 version is 4.00.950 or 4.00.950A, you are using Windows 95.
Windows 95 OSR 2
1Make sure the LAN PC Card is installed and connected to the network as described in Chapter 1.
2Turn on your computer.
The Update Device Driver wizard detects the card and displays 3Com Megahertz 589E.
3Insert LAN Installation Disk 1 and click OK.
The following message appears: “Windows found the
following updated driver for this device: 3Com Megahertz LAN PC Card (589E) (Ethernet)”.
4Click Finish to accept the driver.
Windows displays the message: “The file net589a.inf on 3Com Megahertz LAN PC Card Installation Disk could not be found. The default directory was C:Windows\Options\Cabs.”
5Enter a: and click OK.
If the software prompts for computer name and workgroup name, enter the information as supplied by your MIS department and click OK.
6If prompted, insert the Windows 95 CD.
The Windows 95 files may be located on the hard drive in the folder C:\windows\options\cabs.