37
Setting a dRMON Password
To promote secure monitoring with dRMON, you can set a password for the dRMON DynamicAccess software.
If you do not choose to set a password, the end node PCs will have the default password for the Edge Monitor. Use this same password for the DynamicAccess software.
To set the password for secure monitoring:
1Run the KEYGEN.EXE file.
The KEYGEN.EXE file encodes the password into the KEYSET.EXE file.
2Enter your password in the dialog box.
3Record your dRMON Edge Monitor System password in a safe place.
4Click OK.
Be sure to insert the KEYSET.EXE file in the login script and run it before you run the DA15CFG.EXE file. Upon completion, the KEYSET.EXE file asks you to reboot.
5Reboot the notebook.
If you enter the password, you can correct it and run the KEYSET.EXE file again from the login script if the end nodes have not been discovered by an Edge Monitor. If the end nodes have been adopted by an Edge Monitor, you can pause the Edge Monitor while you run the KEYSET.EXE file again from a login script to set the correct password.
Be sure to visit the 3Com Web site for additional postings of FAQs for the Edge Monitor System and new DynamicAccess software versions and information at:
http://support.3com.com/nav/trans_net_man.htm http://www.3com.com/dynamicaccess http://support.3com.com/nav/dynamic_access.htm