2.Run INSTALL.EXE from root directory of driver diskette.
3.Select LANTASTIC 6.0 in Network Operating System screen.
4.If current settings are acceptable, select Start Installation” and go to step 6. Otherwise, select Modify Parameters” to make settings changed.
5.Move cursor to focus on each field you want to make a change and press <Enter>” to select a fit value. When the configuration is set completely, press <Enter>” on the OK field to exit the screen and go back the step 4.
6.Installation program starts to copy the related files from diskette to the destination directory and modifies CONFIG.SYS, PROTOCOL.INI, and STARTNET.BAT under usersymbol 146 \f "Parisian BT" \s 10’}s agreement.
7. Please reboot the computer to have the driver take effect.
IBM OS/2 Warp
NDIS2 Driver for OS2 Warp
Before the driver installation, please ensure that the PCMCIA Service was installed and worked