Abocom UCM56CR manual Parts Names and Functions, Hardware connection

Hardware Installation

Parts Names and Functions

USB connection cable: connects the USB host port with the USB V.90 FAX/MODEM. (Note: this included USB connection cable is slightly different from ordinary ones by its particularly plastic-shielded connector. Use only this provided cable for preventing ESD.) USB-B: USB device port.

LINE jack: connects to the phone line.

OH LED indicator: glows when it is in on-line status.

Ready LED indicator: glows when the device is well installed.

Rx/Tx LED indicator: blinks when the USB V.90 Fax/Modem is transmitting/receiving data.

connects to the USB host port	6
	5

4

3

1

2

Hardware connection

- 3 -