Abocom WP2000 manual Encryption Tab, Description Data Encryption, Auth. Mode, Open

Page 15

Encryption Tab

Use the Encryption Tab to configure your WEP settings. WEP (Wired Equivalent Privacy) encryption can be used to ensure the security of your wireless network.

Item	Description
Data Encryption	WEP	is	a	data	security
	mechanism based on a 64 Bit/128
	Bit shared key algorithm. Check
	this box to enable WEP
	encryption.
Auth. Mode	The authentication mode defines
	configuration		options		for	the
	sharing of wireless networks to
	verify	identity		and	access
	privileges of		roaming		wireless
	network cards. You may choose
	between	Open		Authentication,
	Shared	Authentication,				and
	Auto.

- 13 -

Image 15

Contents 802.11b Wireless PCI Card Part15, Class B Regulatory StatementsInstall the Driver & Utility InstallationPage Install the Device Page Page Verify Device Installation Network Status Icon ConfigurationIcon Link Status Link Info Tab Accessing the Configuration UtilityOr 11Mbps or Auto Channel SignalDescription Status Tx RateOperating Configuration TabMode Access Point or Peer-to -Peer Channel DescriptionPreamble Or 11Mbps or AutoDescription Data Encryption Auth. ModeShared Authentication Auto Encryption TabKey Length Bit or 128 Bit Key Format Authentication Open Authentication, thenShared Shared Authentication is when Default KeyApply Displays the current Ssid settingWireless Network Adapter Site Survey TabType Description SignalAccess Point or Peer-to-Peer As Tx Rate, Preamble type, Auth. ModeAdd Profiles TabUtility About Tab

Encryption Tab

Description

Data Encryption

WEP

Auth. Mode

Open

Shared

Authentication,

Auto.