Abocom WP2000 manual Install the Device

Page 5

7.In Start Copying Files, click Next to continue.

8.Select Yes, I want to restart my computer now. Click Finish.

Install the Device

Note: Make sure the procedures in “Install the Driver & Utility” has been performed.

1.Before installing the device, make sure the computer is turned off.

2.Remove the expansion slot cover from the computer.

3.Carefully slide the Wireless PCI Card into the PCI slot. Push evenly and slowly and ensure it is screwed securely in place using the mounting screw.

4.Once the device has been connected to your computer, Windows will detect the new hardware and then automatically copy all of the files needed for networking.

-3 -

Image 5

Contents 802.11b Wireless PCI Card Part15, Class B Regulatory StatementsInstall the Driver & Utility InstallationPage Install the Device Page Page Verify Device Installation Network Status Icon ConfigurationIcon Link Status Link Info Tab Accessing the Configuration UtilityDescription Status SignalTx Rate Or 11Mbps or Auto ChannelMode Access Point or Peer-to -Peer Channel Configuration TabDescription OperatingPreamble Or 11Mbps or AutoShared Authentication Auto Auth. ModeEncryption Tab Description Data EncryptionShared Shared Authentication is when Authentication Open Authentication, thenDefault Key Key Length Bit or 128 Bit Key FormatWireless Network Adapter Displays the current Ssid settingSite Survey Tab ApplyAccess Point or Peer-to-Peer Description SignalAs Tx Rate, Preamble type, Auth. Mode TypeAdd Profiles TabUtility About Tab