Abocom WP2000 manual Description Signal, Type, Access Point or Peer-to-Peer

Page 18

Item	Description

Signal	Displays the signal strength of the
	connection between the Wireless Network
	Adapter and the Access Point it connects
	to.
BSSID	A set of wireless stations is referred to as
/IBSSID	a Basic Service Set (BSS). Computers in a
	BSS must be configured with the same
	BSS ID.
Type	Displays	the type of	Basic	Service	Set.
	( Access Point or		Peer-to-Peer)
	Searches for all available networks.
Re-Scan	Searches for all available networks.
	Clicking on the button, the device will
	Clicking on the button, the device will
	start to rescan and list all available sites.
	Highlight	one of	SSIDs	from	the
Connect	Highlight	one of	SSIDs	from	the
	“Available Network” list and press the
	“Available Network” list and press the
	Connect button to access it. You may also
	change the configuration parameters such
	as Tx Rate, Preamble type, Auth. Mode
	and Data Encryption.

- 16 -

Image 18

Contents 802.11b Wireless PCI Card Regulatory Statements Part15, Class BInstallation Install the Driver & UtilityPage Install the Device Page Page Verify Device Installation Configuration Network Status IconIcon Link Status Accessing the Configuration Utility Link Info TabTx Rate SignalDescription Status Or 11Mbps or Auto ChannelDescription Configuration TabMode Access Point or Peer-to -Peer Channel OperatingOr 11Mbps or Auto PreambleEncryption Tab Auth. ModeShared Authentication Auto Description Data EncryptionDefault Key Authentication Open Authentication, thenShared Shared Authentication is when Key Length Bit or 128 Bit Key FormatSite Survey Tab Displays the current Ssid settingWireless Network Adapter ApplyAs Tx Rate, Preamble type, Auth. Mode Description SignalAccess Point or Peer-to-Peer TypeProfiles Tab AddAbout Tab Utility

Description