Adder Technology X50 manual Connections at the local module, Contents

Connections at the local module

1Where possible ensure that power is disconnected from the computer system to be connected.

2Attach the video, USB (see the Important note on page 5) and (optionally) audio connections

from the computer system to	D
the relevant sockets on the	AD
local module.

3Optionally connect local speakers to the audio output connector on the local module.

To local speakers

D

AD

contents

To speaker output port

To USB port

To primary video output port

Note: The MS2 variant has its primary video, USB and audio connectors arranged in a similar manner to the single unit (shown above).

4Optionally connect a local video monitor to the video out feed- through connector on the local module.

ON		TO
	EMO
		R
	TE	LIN
		K

OUT

welcome

PO

WE

R

installation

[MS2 variant only] Optionally attach a second video input from the computer system to the upper video in socket on the MS2 local module.

To secondary video output port

To local monitor

[MS2 variant only] Optionally attach a second video monitor to the upper video out socket on the MS2 local module.

To secondary local monitor

 operation