Adder Technology SV8PRO, SV16PRO, SV4PRO, SV12PRO manual Other useful installation information

Page 17

F1 - Display firmware first digit

F2 - Display firmware second digit

F3 - Display firmware third digit

F5 - Restore PS/2 mouse function

F6 - Restore IntelliMouse function

F8 - RESET all configurations to default settings. (Display confirms with 'r').

P - Sets password - see section 4.8 for instructions.

E - Exits configure mode and returns the SmartView to normal operation mode.

2.7 Other useful installation information

PC boot up sequence - When your PCs are powered on they communicate with any attached keyboards and mice and setup parameters required by the particular operating system. It is necessary for the SmartView to be attached and powered on during this sequence so that it can give the required responses and keep track of all the modes and settings requested by each of the connected PCs.

Mouse characteristics - do not unplug a PS/2 mouse connection from a PC whilst the PC is on. Due to the design of PS/2 mice communications the mouse function on the PC will be lost and you will have to re-boot the PC to regain normal operation. Unplugging the mouse from the SmartView will also cause it to stop operating when it is plugged back in. RS232 mice can usually be unplugged and plugged back in provided that a mouse was connected when the operating system initially booted. The SmartView is fitted with a PS/2 mouse recovery system which allows you to disconnect and re-connect the shared mouse without powering down the system (although this is generally not advisable) - see section 2.8 for details.

Keyboard and mouse mode switching - The SmartView keeps a log of the keyboard and mouse mode and resolution settings requested by each of the connected PCs. These settings are automatically restored to the shared keyboard and mouse when the SmartView channel is switched thus ensuring maximum software compatibility. The keyboard num, caps and scroll lock states are an obvious example of this process.

SmartView

Installation and Use

Page 16

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Smart View PRO About this manual Safety informationWarranty European EMC directive 89/336/EEC Radio Frequency EnergyContents Appendices SmartView configuration optionsIntroduction Key featuresPackage contents SmartView SV8PRO Product informationSmartView SV4PRO SmartView SV12PRO SmartView SV16PRO What you will need InstallationMounting the SmartView Connecting your devicesConfiguring the SmartView Configuring your PCsTo enter configure mode at power on To enter configure mode whilst the SmartView is runningH2f Ef Summary of SmartView configuration optionsU4 SmartView channels are switchable using 3 button mouse Other useful installation information Re-enabling a disconnected PS/2 mouse SmartView Installation and Use Power on status Using the SmartViewFront panel keys and remote controller Status lightsAuto and Select keys pressed together Lock function Auto keyStatus display Keyboard hotkey control Using the dual control ports a and B‘HOTKEYs’ and ‘1 then 1’ selects channel ‘HOTKEYs’ and ‘1 then 0’ selects channel‘HOTKEYs’ and ‘1 then 2’ selects channel ‘HOTKEYs’ and ‘1 then 3’ selects channelOn Screen Menu control SmartView Installation and Use Selecting a computer on the menu list Deleting a computer from the menu listEditing a computer on the menu list RS232 control Mouse controlCascading SmartViews Summary of keys used by the menu and their functionSmartView Installation and Use Typical cascade of two SmartViews Autoscan ‘lock on’ mode and delay time Screen saver time delaySmartView Installation and Use Mouse mode and mouse switching of channels Keyboard hotkey combination Display appearance options Firmware functions version query, mouse restore and resetOFREDg Setting a security passwordCascade query code Exit configure modeCable specification Appendix A. Cable and connector specificationsCable specifications A1. Keyboard, monitor and mouse to SmartViewA3. Expansion port pin assignments Action Appendix B. Problem SolvingProblem Mouse causes channel to change Problem SmartView Installation and Use S TA L L AT I O N & U S E
Related manuals
Manual 44 pages 28.78 Kb
Top Page Image Contents