Adder Technology SV12PRO, SV16PRO manual Radio Frequency Energy, European EMC directive 89/336/EEC

Page 3

Radio Frequency Energy

Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances.

European EMC directive 89/336/EEC

This equipment has been tested and found to comply with the limits for a class B computing device in accordance with the specifications in the European standard EN55022. These limits are designed to provide reasonable protection against harmful interference. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio or television reception. However, there is no guarantee that harmful interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to correct the interference with one or more of the following measures: (a) Reorient or relocate the receiving antenna. (b) Increase the separation between the equipment and the receiver. (c) Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. (d) Consult the supplier or an experienced radio / TV technician for help.

FCC Compliance Statement (United States) This equipment generates, uses and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a class A computing device in accordance with the specifications in Subpart J of part 15 of FCC rules, which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial environment. Operation of this equipment in a residential area may cause interference, in which case the user at his own expense will be required to take whatever measures may be necessary to correct the interference. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

Canadian Department of Communications RFI statement

This equipment does not exceed the class A limits for radio noise emissions from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le règlement sur le brouillage radioélectriques publié par le ministère des Communications du Canada.

SmartView

Installation and Use

Page 2

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Smart View PRO Safety information WarrantyAbout this manual European EMC directive 89/336/EEC Radio Frequency EnergyContents Appendices SmartView configuration optionsIntroduction Key featuresPackage contents SmartView SV8PRO Product informationSmartView SV4PRO SmartView SV12PRO SmartView SV16PRO What you will need InstallationMounting the SmartView Connecting your devicesTo enter configure mode whilst the SmartView is running Configuring your PCsConfiguring the SmartView To enter configure mode at power onH2f Ef Summary of SmartView configuration optionsU4 SmartView channels are switchable using 3 button mouse Other useful installation information Re-enabling a disconnected PS/2 mouse SmartView Installation and Use Status lights Using the SmartViewPower on status Front panel keys and remote controllerAuto and Select keys pressed together Lock function Auto keyStatus display Keyboard hotkey control Using the dual control ports a and B‘HOTKEYs’ and ‘1 then 3’ selects channel ‘HOTKEYs’ and ‘1 then 0’ selects channel‘HOTKEYs’ and ‘1 then 1’ selects channel ‘HOTKEYs’ and ‘1 then 2’ selects channelOn Screen Menu control SmartView Installation and Use Deleting a computer from the menu list Editing a computer on the menu listSelecting a computer on the menu list Summary of keys used by the menu and their function Mouse controlRS232 control Cascading SmartViewsSmartView Installation and Use Typical cascade of two SmartViews Autoscan ‘lock on’ mode and delay time Screen saver time delaySmartView Installation and Use Mouse mode and mouse switching of channels Keyboard hotkey combination Display appearance options Firmware functions version query, mouse restore and resetOFREDg Setting a security passwordCascade query code Exit configure modeA1. Keyboard, monitor and mouse to SmartView Appendix A. Cable and connector specificationsCable specification Cable specificationsA3. Expansion port pin assignments Appendix B. Problem Solving ProblemAction Mouse causes channel to change Problem SmartView Installation and Use S TA L L AT I O N & U S E
Related manuals
Manual 44 pages 28.78 Kb
Top Page Image Contents