5.1.3 ASUS CrashFree BIOS 2 utility
The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can update a corrupted BIOS file using the motherboard support CD, or the USB Flash that contains the updated BIOS file.
•Prepare the motherboard support CD, or the USB Flash containing
the updated motherboard BIOS before using this utility.
•Make sure that you rename the original or updated BIOS file in the
USB Flash to P5L8L.ROM.
Recovering the BIOS from a floppy disk
To recover the BIOS from a USB Flash:
1.Turn on the system.
2.Connect the USB Flash to the PC.
3.The utility displays the following message and automatically checks the USB Flash for the original or updated BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
If your display monitor is connected to the onboard VGA connector, the display monitor will
When found, the utility reads the BIOS file and starts flashing the corrupted BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
Floppy found!
Reading file “P5LVM139.ROM”. Completed.
Start flashing...
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause system boot failure!
4.Restart the system after the utility completes the updating process.
ASUS | 5- |