5.5.4 | APM Configuration |
| |
APM Configuration |
| Enabled or disable | |
|
|
| |
Power button Mode | [On/Off] | APM. | |
Restore on AC Power Loss | [Power Off] |
| |
Power On By RTC Alarm | [Disabled] |
| |
Power On By External Modems | [Disabled] |
| |
Power On By PCI Devices | [Disabled] |
| |
Power On By PCIE Devices | [Disabled] |
| |
Power On By PS/2 Keyboard | [Disabled] |
| |
Power On By PS/2 Mouse | [Disabled] |
| |
Power Button Mode [On/Off]
Go into On/Off, or suspend when Power button is pressed. Configuration options: [On/Off] [Suspend]
Restore on AC Power Loss
[Power
Off]
When set to Power Off, the system goes into off state after an AC power loss. When set to Power On, the system goes on after an AC power loss. When set to Last State, the system goes into either off or on state, whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute, and RTC Alarm Second appear with set values. Configuration options: [Disabled] [Enabled]
Power On By External
Modems [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer when the external modem receives a call while the computer is in
The computer cannot receive or transmit data until the computer and applications are fully running. Thus, connection cannot be made on the first try. Turning an external modem off and then back on while the computer is off causes an initialization string that turns the system power on.
Power On By PCI
Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system through a PCI LAN or modem card. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Chapter 5: BIOS setup |