Asus VESA Wall Mount Setup for VE228 and VE228H Monitors

2.3Detaching the arm/base (for VESA wall mount)

The detachable arm/base of this LED monitor is specially designed for VESA wall mount.

To detach the arm/base:

1.Have the front of the monitor face down on a table.

2.Remove the rubbers in the four screw holes (Figure 1).

3.Use a screwdriver to remove the two screws on the arm (Figure 2), then slide out the arm/base to detach it from the monitor (Figure 2).

Rubbers in the screw holes

Lock Release

1

Lock Release

1

2

Figure 1 Arm/base Figure 2

We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

2-2 Chapter 2: Setup