Cisco Systems OL-16146-10 manual Duplex LC-Type Cable and Connector

Chapter 2 Overview: Cisco 7600 Series Ethernet Services Plus Line Cards

Cisco 76-ES+T+XC-40G Line Card Overview

•Height: 12.5 mm

•Width: 18.35 mm

•Length: 71.1mm

The XFP module temperature range is 0°C to 70°C. Figure 2-32shows a typical XFP module.

Figure 2-53 XFP Module

129499

Connectors and Cabling

The XFP optical transceiver module on the Cisco 76-ES+T+XC-40G line card requires dual LC or PC connectors. Only the patch cord connections with PC or UPC connectors are supported. Patch cords with APC connectors are not supported. All cables and cable assemblies used must be compliant with the standards specified below:

•GR-20-CORE: Generic requirements for optical fiber and optical fiber cable.

•GR-326-CORE: Generic requirements for singlemode optical connectors and jumper assemblies.

•GR-1435-CORE: Generic requirements for multi-fiber optical connectors.

Figure 2-54shows the cable type used with the XFP optical transceiver module on the Cisco 76-ES+T+XC-40G card.

Figure 2-54 Duplex LC-Type Cable and Connector

57653

For additional information on Cisco Transceiver Modules, see

http://www.cisco.com/en/US/products/hw/modules/ps5455/products_data_sheets_list.html.

	Cisco 7600 Series Ethernet Services Plus Line Card Hardware Installation Guide
2-74	OL-16146-10