Chapter 4 Installing and Removing a Cisco 7600 Series Ethernet Services Plus Line Card

Online Insertion and Removal

1Pass

2Pass

3Pass 3/2 Pass

4Pass

5Pass

6Pass

Router# Router2#conf t

Enter configuration commands, one per line. End with CNTL/Z. PE2(config)#no power enable module 6

PE2(config)#end

PE2#

*May 15 10:30:54.227 UTC: %SYS-5-CONFIG_I: Configured from console by console PE2#

*May 15 10:30:53.325 UTC: %C6KPWR-SP-4-DISABLED: power to module in slot 6 set off (admin request)

Router#

Preparing for Online Removal of a SFP or XFP Modules

The Cisco 7600 series routers support OIR of a SFP or XFP modules independently of removing the Cisco 7600 Series ES+ line card. This means that a Cisco 7600 Series ES+ line card can remain installed in the router with one XFP remaining active, while you remove another XFP from one of the line card ports. Or, that an Cisco 7600 Series ES+ line card can remain installed in the router with some number of SFP modules remaining active, while you remove other SFP modules from the line card ports.

The interface configuration is retained (recalled) if a Cisco 7600 Series ES+ line card or SFP or XFP is removed and then replaced with one of the same type.

If you are planning to remove a Cisco 7600 Series ES+ line card along with its SFP or XFP modules, then you do not need to follow the instructions in this section. To remove a Cisco 7600 Series ES+ line card, see the “Preparing for Online Removal of a Cisco 7600 Series Ethernet Services Plus Line Card” section on page 4-2.

SFP Module or XFP Module OIR

The SFP and XFP modules support online insertion and removal (OIR). However, if the line card is already installed in the router and the system is operational, we recommend that you administratively shut down the SFP or XFP module port before installing a new module.

Cisco 7600 Series Ethernet Services Plus Line Card Hardware Installation Guide

4-6

OL-16146-10

 

 

Page 112
Image 112
Cisco Systems OL-16146-10 manual Preparing for Online Removal of a SFP or XFP Modules, SFP Module or XFP Module OIR

OL-16146-10 specifications

Cisco Systems OL-16146-10 is a powerful and versatile member of the Cisco networking product line, specifically designed to serve in various networking scenarios, including enterprise environments. This model is tailored to address the growing demands for reliable connectivity, security, and performance, making it an essential asset for modern organizations that rely on seamless communication and robust data transfer.

One of the main features of the OL-16146-10 is its exceptional scalability. The device supports a wide range of configurations, allowing businesses to tailor their network solutions according to specific needs. This flexibility makes it suitable for both small businesses and large-scale enterprises.

In addition to scalability, the OL-16146-10 incorporates advanced security features, which are critical in today’s cyber-threat landscape. Built-in security protocols safeguard the network against unauthorized access and cyberattacks, ensuring that sensitive data remains protected. The device offers features like intrusion prevention systems (IPS) and integrated virtual private network (VPN) capabilities, allowing secure remote access for employees without compromising internal security measures.

Equipped with cutting-edge technologies, the OL-16146-10 supports high-speed data transfer and optimal performance even under heavy traffic loads. The device takes advantage of Cisco’s innovative routing and switching capabilities, allowing it to efficiently manage multiple data streams. This ensures minimal latency and high throughput, which is essential for applications that require real-time communication, such as VoIP and video conferencing.

Moreover, the OL-16146-10 incorporates advanced quality of service (QoS) features, which enable prioritization of critical applications over less essential traffic. This guarantees that mission-critical applications receive the bandwidth they need, contributing to consistent performance across the network.

Management and monitoring are simplified with the OL-16146-10 due to its support for Cisco’s renowned network management tools. Administrators can efficiently configure and monitor the network, troubleshoot issues, and optimize performance through intuitive interfaces.

In summary, the Cisco Systems OL-16146-10 is characterized by its scalability, robust security features, high performance, advanced QoS capabilities, and user-friendly management tools. These characteristics make it a preferred choice for organizations looking to enhance their networking infrastructure and meet the evolving demands of the digital era.