Cisco Systems OL-16146-10 manual Cisco 76-ES+T+XC-20G Line Card Overview

Chapter 2 Overview: Cisco 7600 Series Ethernet Services Plus Line Cards

Cisco 76-ES+T+XC-20G Line Card Overview

Figure 2-47 XFP Module

129499

Connectors and Cabling

The XFP optical transceiver module on the Cisco 7600 ES+ 2TG3C, 7600 ES+ 2TG3CXL line card require dual LC/PC connectors. Only connections with patch cords with PC or UPC connectors are supported. Patch cords with APC connectors are not supported. All cables and cable assemblies used must be compliant with the standards specified below:

•GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable

•GR-326-CORE: Generic Requirements for Singlemode Optical Connectors and Jumper Assemblies

•GR-1435-CORE: Generic Requirements for Multi-Fiber Optical Connectors

Figure 2-48shows the cable type for use with the XFP optical transceiver module on the Cisco 76-ES+XC-40G3C, 76-ES+XC-40G3CXL line card.

Figure 2-48 Duplex LC-Type Cable and Connector

57653

For additional information on Cisco Transceiver Modules, see

http://www.cisco.com/en/US/products/hw/modules/ps5455/products_data_sheets_list.html.

Cisco 76-ES+T+XC-20G Line Card Overview

The following sections describe the Cisco 76-ES+T+XC-20G line cards:

•Cisco 76-ES+T+XC-20G Line Card Processors, page 2-67

•Cisco 76-ES+T+XC-20G Line Card LEDs, page 2-67

•Cisco 76-ES+T+XC-20G Physical Specifications, page 2-67

•Cisco 76-ES+T+XC-20G Line Card Memory Options, page 2-68

	Cisco 7600 Series Ethernet Services Plus Line Card Hardware Installation Guide
2-66	OL-16146-10