Cisco Systems OL-16146-10 manual Router# show power

Chapter 1 Cisco 7600 Ethernet Services Plus Line Card Product Overview

Power Management

Note The show power command displays only the values programmed in the IDPROM and the IDPROM is not dynamically updated for different power values.

This is sample output for the show power command on a Cisco 7600 series router:

Router# show power

system power redundancy		mode = redundant
system power redundancy		operationally = non-redundant
system power total =		3795.12		Watts	(90.36	Amps @	42V)
system power used =		3320.94		Watts	(79.07	Amps @	42V)
system power available =		474.18		Watts	(11.29	Amps @	42V)
		Power-Capacity			PS-Fan Output		Oper
PS	Type	Watts	A @42V		Status	Status	State
----	------------------	------- ------			------	------	-----
1	WS-CAC-4000W-INT	3795.12	90.36		OK	OK	on
2	none
		Pwr-Allocated			Oper
Fan	Type	Watts	A @42V		State

---------------------- ------- ------ -----

1 WS-C6K-13SLT-FAN2 298.20 7.10 OK

		Pwr-Requested		Pwr-Allocated		Admin	Oper
Slot	Card-Type	Watts	A @42V Watts		A @42V	State	State
----	------------------ ------- ------ -------				------	-----	-----
2	7600-SIP-200	240.24	5.72	240.24	5.72	on	on
3	WS-X6724-SFP	125.16	2.98	125.16	2.98	on	on
4	7600-SIP-400	265.02	6.31	265.02	6.31	on	on
7	RSP720-3CXL-GE	354.06	8.43	354.06	8.43	on	on
8	RSP720-3C-GE	354.06	8.43	354.06	8.43	on	on
9	7600-ESM-BASE	304.92	7.26	304.92	7.26	on	on
10	7600-ES+20G3CXL	297.36	7.08	297.36	7.08	on	on
11	7600-SIP-600	341.88	8.14	341.88	8.14	on	on
12	7600-SIP-600	341.88	8.14	341.88	8.14	on	on
13	WS-X6704-10GE	398.16	9.48	398.16	9.48	on	on

Router#

This is sample output for the show power command on a Cisco 7600 series router for a

76-ES+T+XC-40G low queue combo card:

A3-2#show power

system power redundancy mode = redundant

system power redundancy operationally = non-redundant system power total = 2671.20 Watts (63.60 Amps @ 42V) system power used = 1477.14 Watts (35.17 Amps @ 42V) system power available = 1194.06 Watts (28.43 Amps @ 42V) Power-Capacity PS-Fan Output Oper

PS Type Watts A @42V Status Status State

---- ------------------ ------- ------ ------ ------ -----

1 WS-CAC-6000W 2671.20 63.60 OK OK on 2 none

Pwr-Requested Pwr-Allocated Admin Oper

	Slot Card-Type Watts A @42V Watts A				@42V	State	State
---- ------------------			------- ------ -------				------ ----- -----
1		7600-SIP-600 341.88 8.14 341.88 8.14 on on
4		7600-ES20-GE3C 340.20	8.10	- - off off		(admin request)
5		(Redundant Sup) - - 354.06		8.43 -	-
6		RSP720-3CXL-GE 354.06	8.43	354.06	8.43	on on
7		7600-ES+20G3C 276.36 6.58 - - off			off (admin		request)
8		7600-ES20-GE3C 340.20	8.10	- - off off		(admin request)
9		'76-ES+T+XC-40G' 427.14 10.17 427.14 10.17 on on
			Cisco 7600 Series Ethernet Services Plus Line Card Hardware Installation Guide
	OL-16146-10							1-9