NetComm Rear Panel, Network Cable Connector, External Antenna for NS380W only, Reset Button

Rear Panel

1.Network Cable Connector

The Pan/Tilt Internet Camera’s rear panel features an RJ-45 connector for connections to 10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling (which should be Category 5 twisted-pair cable). The port supports the N-Way protocol and “Auto- MDIX” function, allowing the Pan/Tilt Internet Camera to automatically detect or negotiate the transmission speed of the network.

2.External Antenna (for NS380W only)

The rotatable external antenna allows you to adjust its position to obtain the maximum signal.

3.Reset Button

Reset will be initiated when the reset button is pressed once, and Power LED begins to flash.

Factory Reset will be initiated when the reset button is pressed continuously for three seconds or when Power LED begins to light up. Release the reset button and the Power LED will begin to flash, indicating the Pan/Tilt Internet Camera is changing to factory reset. When factory reset is completed, the Pan/Tilt Internet Camera will be set to default on channel 11 and SSID is set as “NULL String” (This default setting will let the Pan/Tilt Internet Camera connect to ANY access point on the infrastructure network). The IP address will also return to the default setting as 192.168.0.20.

4.DC Power Connector

The DC power input connector is located on the Pan/Tilt Internet Camera’s rear panel, and is labelled DC5V with a single jack socket to supply power to the Pan/Tilt Internet Camera. Power will be generated when the power supply is connected to a wall outlet.

NS380 / NS380W User Guide	9
YML826 Rev1 - Pan/Tilt Internet Camera