NetComm NS380W View Window, View Mode, Buttons, Key Lock, Power Button, Pan/Tilt, Record Button

View Window	Show the camera’s view in this window.
View Mode	Select the view mode from these buttons.
Buttons		Show one camera in View Window.
		Show four cameras in View Window.
		Show six cameras in View Window with the first one as the
		major view.
		Show eight cameras in View Window with the first one as
		the major view.
		Show nine cameras in View Window.
		Show ten cameras in View Window with the first two as
		the major views.
		Show thirteen cameras in View Window with the first one
		as the major view.
		Show sixteen cameras in View Window.
		Show the selected camera in full screen view.
		Enable displaying the video views in circles.
Key Lock	Click to	lock/unlock the camera. When locked, the user cannot
Button	operate any camera.
Power Button	Click to exit or minimize IPView Pro.
Pan/Tilt	When the camera is added, the Pan/Tilt control buttons will appear
Control Button on the panel, as shown below:

	/	/	/	/	/	/	/	: Click these
	buttons to adjust the camera’s viewing angle to Up/ Down/Left/
	Right/Left-Up/Left-Down/Right-Up/Right-Down.
	: Once you have saved two (or more) positions in the camera,
	click the Swing button to control the camera swinging from one
	position to another position.
	: Click the Home button to return the camera to the default
	position.
Record Button	Record video clip of the selected camera and save it in the computer.
	The storage position can be configured in System Configuration.
	When you click the button, you can select Manual Record, Schedule
	Record, or Motion Record.
Play Button	Play the recorded video file in the computer.
System	Click to enter the System Configuration.
Configure
NS380 / NS380W User Guide								43

YML826 Rev1 - Pan/Tilt Internet Camera