Web Configuration Utility

You can access and manage the Pan/Tilt Internet Camera through: 1) a web browser, and 2) the enclosed software IPView Pro. This chapter describes the Web Configuration Utility, and provides the instructions on using the camera with a web browser.

Accessing the Camera with the Web Configuration Utility

The Pan/Tilt Internet Camera must be configured through its built-in Web-based Configuration. From the web browser, enter the default IP address to access the Welcome screen of the Pan/Tilt Internet Camera. To configure your Pan/Tilt Internet Camera, type http://192.168.0.20 in the address box. The number is the default IP address of your Pan/Tilt Internet Camera. Then, press [Enter].

NOTE:

The computer’s IP address must correspond with the camera’s IP

 

address in the same segment for the two devices to communicate.

 

For example, you can change the IP address of your PC to

 

192.168.0.10 in order to access the camera.

Welcome Screen of the Configuration Utility

After the default IP address is entered from the browser, the Pan/Tilt Internet Camera Welcome screen will appear with a still image. There will be three options to choose from to set-up and view your Pan/Tilt Internet Camera, including:

View Video – ActiveX Mode

View Video – Java Mode

System Administration

14

NS380 / NS380W User Guide

 

YML826 Rev1 - Pan/Tilt Internet Camera

Page 14
Image 14
NetComm NS380W manual Accessing the Camera with the Web Configuration Utility, Order to access the camera