Chapter 6 Troubleshooting

Packing a Cisco 7600 ES+ Line Card for Shipment

Packing a Cisco 7600 ES+ Line Card for Shipment

This section provides step-by-step instructions for packing a Cisco 7600 Series ES+ line card for shipment. Before beginning this procedure, you should have the following original Cisco Systems packaging materials:

Static shielding bag

Smaller inner carton

Larger exterior carton

Two foam packing cushions

Caution The Cisco Systems original packaging is to be used for the shipment of all Cisco 7600 Series ES+ line cards. Failure to properly use Cisco Systems packaging can result in damage or loss of product.

Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself.

Note These instructions assume that the Cisco 7600 Series ES+ line card has been removed from the router according to the recommended procedures specified in this guide.

To pack a Cisco 7600 Series ES+ line card for shipment, perform the following steps:

Step 1 Insert the Cisco 7600 Series ES+ line card into the static shielding bag.

Step 2 Insert the bagged Cisco 7600 Series ES+ line card into the smaller inner carton. Be careful to position the Cisco 7600 Series ES+ line card so that the bottom motherboard lip is held by the packaging cutout.

Step 3 Close the smaller inner carton and tape the sides closed.

Step 4 Place the sealed smaller inner carton containing the Cisco 7600 Series ES+ line card into the two foam packing cushions (they only fit one way).

Step 5 Place the sealed smaller inner carton and packing cushions into the larger exterior carton, and seal the larger exterior carton with tape for shipment.

Cisco 7600 Series Ethernet Services Plus Line Card Hardware Installation Guide

6-8

OL-16146-10

 

 

Page 136
Image 136
Cisco Systems OL-16146-10 manual Packing a Cisco 7600 ES+ Line Card for Shipment

OL-16146-10 specifications

Cisco Systems OL-16146-10 is a powerful and versatile member of the Cisco networking product line, specifically designed to serve in various networking scenarios, including enterprise environments. This model is tailored to address the growing demands for reliable connectivity, security, and performance, making it an essential asset for modern organizations that rely on seamless communication and robust data transfer.

One of the main features of the OL-16146-10 is its exceptional scalability. The device supports a wide range of configurations, allowing businesses to tailor their network solutions according to specific needs. This flexibility makes it suitable for both small businesses and large-scale enterprises.

In addition to scalability, the OL-16146-10 incorporates advanced security features, which are critical in today’s cyber-threat landscape. Built-in security protocols safeguard the network against unauthorized access and cyberattacks, ensuring that sensitive data remains protected. The device offers features like intrusion prevention systems (IPS) and integrated virtual private network (VPN) capabilities, allowing secure remote access for employees without compromising internal security measures.

Equipped with cutting-edge technologies, the OL-16146-10 supports high-speed data transfer and optimal performance even under heavy traffic loads. The device takes advantage of Cisco’s innovative routing and switching capabilities, allowing it to efficiently manage multiple data streams. This ensures minimal latency and high throughput, which is essential for applications that require real-time communication, such as VoIP and video conferencing.

Moreover, the OL-16146-10 incorporates advanced quality of service (QoS) features, which enable prioritization of critical applications over less essential traffic. This guarantees that mission-critical applications receive the bandwidth they need, contributing to consistent performance across the network.

Management and monitoring are simplified with the OL-16146-10 due to its support for Cisco’s renowned network management tools. Administrators can efficiently configure and monitor the network, troubleshoot issues, and optimize performance through intuitive interfaces.

In summary, the Cisco Systems OL-16146-10 is characterized by its scalability, robust security features, high performance, advanced QoS capabilities, and user-friendly management tools. These characteristics make it a preferred choice for organizations looking to enhance their networking infrastructure and meet the evolving demands of the digital era.