Asus VK191 manual Detaching the arm/base for Vesa wall mount

Page 14

2.3Detaching the arm/base (for VESA wall mount)

The detachable arm/base of the VK191 Series LCD monitor is specially designed for VESA wall mount.

To detach the arm/base:

1.Have the front of the monitor face down on a table.

2.Remove the rubbers in the four screw holes (Figure 1).

3.Follow the direction to remove the back lid (Figure 1). Use a screwdriver to remove the four screws on the arm, then slide out the arm/base to detach it from the monitor (Figure 2).

Rubbers in the screw holes

Back lid

Arm/base

Figure 1

Figure 2

We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

2-2

Chapter 2: Setup

Image 14
Contents User Guide E3572 First Edition December Contents Federal Communications Commission Statement Canadian Department of Communications StatementSafety information Conventions used in this guide Care & CleaningFollowing symptoms are normal with the monitor Where to find more information Asus websites Optional documentationViii Package contents WelcomeMonitor introduction Button For those models without speakersRear connectors Back viewProduct introduction Adjusting the monitor Assembling the monitor baseDetaching the arm/base for Vesa wall mount To connect the VGA/DVI cable Connecting the cablesTurning on the monitor Installation instructions LifeFrame 2 softwareOSD On-Screen Display menu SpendidImage ColorInput Select System SetupOSD Setup Specifications summary Panel Type Panel size Max. Resolution BrightnessTroubleshooting FAQ Possible SolutionSupported operating modes Refresh Rate