Image, Input Select | Asus VS247N/H, VS238N/H, VS228D/N/H instruction

3.Image

You can adjust the image Sharpness, Aspect Control, Position (VGA only), and Focus (VGA only) from this main function.

VS247

Splendid	Sharpness	40
Color	Aspect Control	Full
Image	ASCR	OFF
Input Select	Position


System Setup	Focus

Move	Menu	Exit

•Sharpness: Asjust the picture sharpness. The adjusting range is from 0 to 100. (Only available for selecting “Standard Mode” in Splendid menu.)

•Aspect Control: Adjust the aspect ratio to “Full”, “4:3”, or “Over Scan”. (The “Over Scan” ratio is only available for HDMI input.)

•ASCR: Select ON or OFF to enable or disable dynamic contrast

ratio function. (ASCR: ASUS Smart Contrast Ratio. Disabled at “Standard Mode”.)

•Position: Adjust the horizontal postition (H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100. (Only available for VGA input.)

•Focus: Reduce Horizonal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to 100. (Only available for VGA input.)

4.Input Select

Select the input source from VGA, DVI, or HDMI.

VS247

SplendidVGA

ColorDVI

ImageHDMI

Input Select

System Setup

Move Menu Exit

•DVI: Available for model VS228N/H, VS238N/H, VS247N/H only.

•HDMI: Available for model VS228H, VS238H, VS247H only.

3-3	Chapter 3: General Instruction