Asus VH238H manual Image

Page 14

3.Image

You can adjust the image Sharpness, Trace Free, Aspect Control, ASCR, Position (VGA only), and Focus (VGA only) from this main function.

VH238

 

Splendid

 

Sharpness

50

 

Color

 

Trace Free

60

 

Image

 

Aspect Control

Full

 

Input Select

 

ASCR

OFF

 

 

 

 

 

System Setup

 

Position

 

 

 

 

Focus

 

 

 

 

 

 

 

Move

Menu

Exit

 

 

 

 

 

Sharpness: Adjust the picture sharpness. The adjusting range is from 0 to 100.

Trace Free: Speed up the response time by Over Drive technology. The adjusting range is from lower 0 to faster 100.

Aspect Control: Adjust the aspect ratio to “Full”, “4:3”, or “Over Scan” (Only available for HDMI input).

ASCR: Select ON or OFF to enable or disable dynamic contrast ratio function.

Position: Adjust the horizontal position (H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100 (Only available for VGA input).

Focus: Reduce Horizonal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to 100 (Only available for VGA input).

• Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal disturbances.

Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the image is not proportional.

ASUS LCD Monitor VH238H Series

3-3

Image 14
Contents User Guide Table of contents Federal Communications Commission Statement Canadian Department of Communications StatementSafety information Conventions used in this guide Care & CleaningFollowing symptoms are normal with the monitor Package contents WelcomeFront of the LCD monitor Assembling the monitor baseMonitor introduction 1.1 VH238HButton Rear of the LCD monitor 2.1 VH238HDetaching the arm/stand for Vesa wall mount To detach the arm/standAdjusting the monitor OSD Function Introduction How to reconfigureOSD On-Screen Display menu SplendidColor Select the image color you like from this functionImage Input Select System SetupAdjust the system configuration Select the input source from VGA, DVI, or HdmiAsus LCD Monitor VH238H Series Specifications summary ModelTroubleshooting FAQ Possible SolutionResolution Refresh Rate Horizontal Frequency Supported Timing List
Related manuals
Manual 19 pages 55.44 Kb