NAD 912 owner manual Power Amplifier Specification - Nad, Stereo Mode, Bridged Monophonic Mode

POWER AMPLIFIER SPECIFICATION - NAD 912

Stereo Mode
CONTINUOUS AVERAGE POWER	30 W (14.8 dBW)
OUTPUT INTO 8 OHMS
(Min. power per channel, 20Hz-20kHz, both channels driven, with no more than rated distortion)
Rated distortion (THD 20Hz-20kHz)	0.05 %
Clipping power (maximum continuous power per channel)	38 W
IHF dynamic headroom at 8 ohms	+2 dB
IHF dynamic power (maximum short term power per channel)
8	:48 W	(16.8 dBW)
4	:65 W	(18 dBW)
2	:85 W	(19.3 dBW)

Input impedance		R = 10 k
		C = 470 pF
Input sensitivity (for rated power into 8 )		1 V
Voltage gain		X15.5 (23.8 dB)
Frequency response 20 Hz to 20 kHz		+0.2 dB
2 Hz to 100 kHz		+0,-3dB
Signal/Noise ratio, A weighted		95 dB ref. 1 W
		110 dB ref. rated power
THD		<0.05%
(Total Harmonic Distortion, 20Hz-20kHz, from 250mW to rated output)
SMPTE I.M.		<0.05%
(IM distortion, 60Hz+7kHz, 4:1 from 250mW to rated output)
IHF I.M.		<0.05%
(CCIF IM distortion, 19+20kHz at rated output)
Bridged (Monophonic) Mode
CONTINUOUS AVERAGE POWER		90 W (19.5 dBW)
OUTPUT INTO 8 OHMS
(Min. power 20Hz-20kHz, , with no more than rated distortion)
IHF dynamic headroom at 8 ohms		+2 dB
IHF dynamic power (maximum short term power per channel)
8	:	140 W (21.5 dBW)
4	:	170 W (22.3 dBW)
Physical Specification
Dimensions in mm (W x H x D)		435 x 118 x 305
Net Weight		5.8kg
Shipping weight		7.1kg

NAD

18