Asus Detaching the Stand for VESA Wall Mount - Vk221 and Vk222 Monitors

Page 13

2.1 Detaching the arm/stand (for VESA wall mount)

The detachable stand of the VK221/VK222 Series LCD monitor is specially designed for VESA wall mount.

To detach the arm/stand:

1.Remove the arm cover.

2.Have the front of the monitor face down on a table.

3.Use a screwdriver to remove the three screws on the stand of the monitor as the below drawing shows.

4.Detach the arm from the monitor.

We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

Hold the stand of the monitor when you remove the screws.

3 screws

The VESA wall mount kit (100 mm x 100 mm) is purchased separately.

ASUS LCD Monitor VK221/VK222 Series

2-

Image 13
Contents User Guide Table of contents Canadian Department of Communications Statement Federal Communications Commission StatementSafety information Following symptoms are normal with the monitor Care & CleaningConventions used in this guide Asus websites Optional documentation Where to find more informationWelcome Package contentsAssembling the monitor base Front of the LCD monitor Monitor introduction1.1 VK222H/VK222U 1.2 VK221S/VK222S 1.3 VK221D Rear of the LCD monitor Rear connectors from left to right2.1 VK222H 2.2 VK222U/VK222S/VK221S/VK221DDetaching the arm/stand for Vesa wall mount Install Life-Frame 2 software Adjusting the monitorInstallation instructions OSD On-Screen Display menu How to reconfigureOSD Function Introduction SpendidColor ImageInput Select System SetupFor VK222 series models Specifications summaryProblem Possible Solution Troubleshooting FAQMAC Modes IBM ModesVesa Modes VK222H Hdmi Supported Optional Timings VK222H Hdmi Supported Primary Timings